Must Know - Installing One Way Vision Films

Feb 8, 2016 10:24:58 AM Solvit User
  • Always test the product prior to use by cutting a small peice of the SolviT One Way Vision Film and pasting it on the surface you are going install.
  • SolviT One Way Vision Film perforated window films can damage glass with anti-reflective, self-cleaning and scratch resistance coatings, which mainly get damaged during film removal. Please test prior to final application if in doubt.
  • SolviT One Way Vision Film perforated window films must not be are not to be applied to fresh coat of paint.
  • SolviT One Way Vision Film is available in various peforation ratios such as 70: 30, 60:40, & 50:50. Some states or local authorities have laws or regulations requiring minimum light transmission that may limit or preclude the use of this product on vehicle windows. A printer is responsible for determining and complying with all applicable standards. So we suggest printers do check with their local authorities before installation.
  • It is highly recommended to clean the surface with mild soap and water on which you plan to install SolviT One Way Vision Film. This ensures the removal of any dust debries or residues of Wax or Oil or such.
  • Please allow sufficient time for SolviT One Way Vision Film after printing & before overlaminating. This is called as to ‘outgas’. The timescales of waiting period is generally determined by the ink manufacturers so please ask you Ink rep before you laminate regarding the recommended waiting period.
  • When applying the perforating film, avoid touching the adhesive side of the film. Installer generally tend to touch the edges and corners while removing the release paper. However this this may result in product failure.
  • We also suggest printers to give Installer some room to release the liner by printing the graphics 1 to 5mm form the edge.
  • Try not to overlap the perforation film which side-by-side oversize install is required.
  • Do not Wash the installed SolviT One Way Vision Film for atleast 24 hours.

Wish to add more, please leave your comments in comments section of this page.