PRODUCT DETAILS
    • Base: Calendared PVC - Perforated
    • Surface Finish: White Gloss
    • Thickness: 170 microns (7 Mil) + Release Liner
    • Release Liner: PE Coated Paper 140 gsm
    • Perforation Ratio: 50:50, 60:40 & 70:30
    • Ink Compatibility: Solvent, Eco Solvent, UV & LATEX
    • Adhesive: Acrylic, Solvent based Permanent Adhesive
    • Removability: Residueless if removed within 1 year in most instances.
    • Ink Limit: Up to 270% with Eco Solvent Inks
PERFORATION DETAILS 
  • 50/50

7mil Black/White Composite PVC with 1.5mm (0.06") perforations with Release Liner.

Perforation Pattern : 50% Perforated 50% Retained

 

  • 60/40

7mil Black/White Composite PVC with 1.6 mm (0.062") perforations with Release Liner.

Perforation Pattern : 40% Perforated 60% Retained

 

  • 70/30

7mil Black/White Composite PVC with 1.4 mm (0.055") perforations with Release Liner.

Perforation Pattern : 30% Perforated 70% Retained

 

TECHNICAL CHARACTERISTICS
PROPERTY  TEST METHOD RESULTS
DIMENSIONAL STABILITY FINAT TM14

Adhered to glass, no shrinkage in cross direction,

 in length 0.3mm max

TEMPERATURE RESISTANCE    Adhered to glass. -20°C to +65°C, no variation
SEA WATER RESISTANCE DIN 50021  Adhered to glass, after 48h/23°C no variation
ADHESIVE STRENGTH FINAT TM1  After 24h stainless steel 4~6N/25 mm
TENSILE STRENGTH    
along

DIN EN ISO 527

 Min. 5 Mpa
across

DIN EN ISO 527

 Min. 5 Mpa
ELONGATION AT BREAK    
along DIN EN ISO 527  Min 50%
across DIN EN ISO 527  Min 50%
APPLICATION TEMPERATURE Clean Dry Surface  50 - 70 F
USAGE INSTRUCTIONS
  • Compatible with original solvent & eco-solvent inks from printers of HP series, Epson series, HP Latex series, Roland series, Mutoh series, Mimaki JV series & wide range of UV printers.
  • Compatible with HP LATEX printers as well. However, HP 1st Gen Latex printers suggested to test the product before proceeding with production run.
  • Use standard vinyl inks. Print image on vinyl, not on the release liner.

 

IMPORTANT NOTICE:

  • Always test the product, before proceeding full production. Sellers only obligation shall be to replace such quantity of product proved to be defective. 
  • NEITHER SELLER NOR MANUFACTURER WILL BE RESPONSIBLE FOR LOSS, or DAMAGE, DIRECT, INCIDENTAL OR CONSEQUENTIAL ARISING OUT OF USE OR THE INABILITY TO USE THIS PRODUCT.
  • Before using, users shall determine the suitability of the product for their intended use, and user assumes all risk and liability whatsoever in connection herewith.