4S Graphics, Inc.
4S Graphics, Inc.
Specialty Substrates for Printing
for EcoSol UV & Latex Inks

4 mil (100 microns) Polyester with Low Tack Removable & Repositionable Adhesive

Leaves no residue perfect for Glass, Plexi Glass, Coroplast, or any smooth surface.

Product Brief:

SolviT SlickStick Vinyl is a polyester film of 4 mil thickness with a micro suction adhesive on the back. This micro suction adhesive acts like a Octopus grip and grips to any smooth surface like a magnet without leaving any residue or stain. The final print product can be applied and re-applied several times as per needs of the client. 

Adhesive-free and non toxic. The back side of the vinyl has tiny suction cups which will grip any smooth surface including painted walls, glass, metal, plastic. Since there is no adhesive, removes cleanly without damaging the surface and will not leave any residue. 

This is not static cling and the grip will not fail over time. Perfect for wall and window graphics!

This product is ideal for printing with EcoSol, UV & Latex printers.

Product Details:

  • Base: Polyester Film 
  • Base Thickness: 4 mil or 100 microns (± 5 micron)
  • Surface Finish: Satin (Luster)
  • Opacity : Not applicable
  • Adhesive: Silicone Adhesive - Repositionable
  • Release Liner: 2 mil (50 microns) Polyester Liner 
  • Ink Compatibility: Eco-solvent & Solvent, UV and Latex inks
  • Ink Limit: Around 350% with original inks
  • Weathering: 1 year to 2 years depending on UV rating.


  • Removable - Repositionable - ReUsable.
  • PVC Free - Adhesive Free - Non Toxic product.
  • Unique Micro Suction technology does not use any Static.
  • No magnets or static, so it’s safe to use on electrical surfaces
  • No messy residue and no shrinkage - conforms to temperature change.
  • Water resistant & can be cleaned using standard window cleaners 
  • Good sheet stability & lay flatness for ease of conversion and application
  • Excellent adhesion to a variety of substrates for wide range of applications
  • Siliconized double sided PE coated paper liner for excellent flatness or 100% P.E.T. liner

Target Applications:

  • High-Quality Image Reproductions.
  • Short Term Advertisements.
  • In-Store Window Signage
  • Paper that needs to work in High Humidity Environments.




EcoSol, UV & Latex Inks 


Polyester Face with Luster Finish



Length : 100 Feet (30 Meters)


SILICONE ADHESIVE - No Static, No Cling, No Magnet


12 - 18 months


3 inch 

Technical Details

AWAITING INFORMATION - Sincere apologies if you were looking for it. 
Frequently Asked Questions (FAQ)

Product Claims & Disclaimer

Our product is supplied in good faith and we hope client will follow all standard instructions while using/installing our vinyl. In the event of a warranted failure, 4S Graphics, Inc. reserves the right of inspection.  4S Graphics, Inc. will, at our option, replace defective materials or refund purchase price thereof. All documentation and administration will be handled through the formal customer service complaint system at  4S Graphics, Inc.. To receive remedy,  4S Graphics, Inc. or the local distributor must be notified of a claim within 30 days of vinyl failure. Date of installation, material lot number, installation procedures, substrate and environmental conditions must be supplied with the description of failure. 

The customer assumes responsibility in determining the product suitability for his intended end use. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the film proven to be defective. Neither the seller nor the manufacturer shall be liable for any injury, loss or damage direct or indirect, arising from the use or inability to use these products. See  4S Graphics, Inc.’s Terms and Conditions. 

DOWNLOAD SECTION (under process)


Download this product information as a PDF file by clicking this link. 


Download this product installation instructions as a PDF file by clicking this link.